PS Steel Socket Female Union
PS Steel Socket Female Union
Basic Info
Model No.: PS3/8B-28L
Product Description
PS Steel Socket Female Union
-
Material standard
General structural carbon steel pipe (JIS G3444) or equivalent material is used. -
Screw standard
This is an internal thread type pipe fitting (conforming to JIS B0203) that requires a parallel female thread [symbol: PS (Rp)] for taper male thread or a taper female thread [symbol: PT (Rc)]. Suitable for joining pipe nipples, other pipe material parts, fluid equipment, etc. with pipe male thread (PT) for pipes whose main purpose is tightness. -
About inspection of screw
All thread inspections are performed using a taper thread gauge specified in the standard number (JIS B0253) defined by the Japanese Industrial Standards (JIS standard). In addition, our inspection gauge manufacturer uses OSG (OSG). -
Join method
When tightening, after tightening by hand, it is necessary to tighten with torque using a tool such as a pipe wrench. However, in order to tightly bond, even if it is tightened tightly, there is a slight space between the top and bottom of the mountain in practical use, and perfect airtightness cannot be secured. Therefore, it is necessary to take measures such as wrapping seal tape (tape-like gap filling material) around the screw before assembly or applying the same liquid sealant. (It is necessary to select the type of sealing material suitable for the piping application.) Also, when assembling in a place where attention is paid to leakage, seal tape (about 2 to 3 turns) is wrapped around the external thread. Apply sealant from the top, and apply sealant on the female thread side to secure tightness. -
Inspection pressure
Leakage(pneumatic) 0.5Mpa(5.1kgf/cm2) Pressure resistance(water pressure) 2.5Mpa(25.5kgf/cm2)
-
Type, symbol, chemical composition
Type Symbol Chemical composition(%) C Si Mn P S Ni Cr Mo Carbon steel pipe for general structure STK 0.25 or less - - 0.040 or less 0.040 or less - - -
Specification
Material standard
General structural carbon steel pipe (JIS G3444) or equivalent material is used.Screw standard
This is an internal thread type pipe fitting (conforming to JIS B0203) that requires a parallel female thread [symbol: PS (Rp)] for taper male thread or a taper female thread [symbol: PT (Rc)]. Suitable for joining pipe nipples, other pipe material parts, fluid equipment, etc. with pipe male thread (PT) for pipes whose main purpose is tightness.About inspection of screw
All thread inspections are performed using a taper thread gauge specified in the standard number (JIS B0253) defined by the Japanese Industrial Standards (JIS standard). In addition, our inspection gauge manufacturer uses OSG (OSG).Join method
When tightening, after tightening by hand, it is necessary to tighten with torque using a tool such as a pipe wrench. However, in order to tightly bond, even if it is tightened tightly, there is a slight space between the top and bottom of the mountain in practical use, and perfect airtightness cannot be secured. Therefore, it is necessary to take measures such as wrapping seal tape (tape-like gap filling material) around the screw before assembly or applying the same liquid sealant. (It is necessary to select the type of sealing material suitable for the piping application.) Also, when assembling in a place where attention is paid to leakage, seal tape (about 2 to 3 turns) is wrapped around the external thread. Apply sealant from the top, and apply sealant on the female thread side to secure tightness.Inspection pressure
Leakage(pneumatic) | 0.5Mpa(5.1kgf/cm2) |
---|---|
Pressure resistance(water pressure) | 2.5Mpa(25.5kgf/cm2) |
Type, symbol, chemical composition
Type | Symbol | Chemical composition(%) | |||||||
---|---|---|---|---|---|---|---|---|---|
C | Si | Mn | P | S | Ni | Cr | Mo | ||
Carbon steel pipe for general structure | STK | 0.25 or less | - | - | 0.040 or less | 0.040 or less | - | - | - |
Specification
Product Categories : Standard Socket > Steel Standard Socket
Hot Products
Special for Generator 4 in 1 generator monitor customized generator partsTR-BAS15-2USB UL and CUL listed RECEPTACLE with USBBAS15-2USB UL and CUL listed receptacle with USBYGC-013 Approved UL94-V0 plastic mini electrical junction boxYGC-014 Electronic instrument enclosures usa socket plastic junction boxYGB-093 BAREP High quality 60HZ 15A wall switch socketYGC-009 Household decorative switch wall plates with socketsBAREP BAO-002 PA6+30% wall plate american plastic switch coverBAO-001 BAREP Outdoor push button lighting american switch cover15 Amp, 120/277 Volt, Decora Rocker Single-Pole AC Quiet Switch, Residential Grade, Grounding, White1-Gang Decora/GFCI Device Decora Wall plate, Standard Size, Thermoset, Device Mount, White15-Amp Single Pole Switch, WhiteAmerican stype wall switch barepCUL listed GFCI receptacle NEMA5-15 Barep with tamper wall outletGFCI receptalce NEMA5-15 BarepGFCI Safety Circuit 15A 125V wall outlet socket